FOAM GUN PREWASH - Prewash for foam gun to remove dirt from the car | ManiacLine

FOAM GUN PREWASH by ManiacLine: prewash for foam gun to remove dirt from the car 00:00 Intro and features 00:10 What FOAMGUN PREWASH by ManiacLine removes 00:22 How to use FOAMGUN PREWASH by ManiacLine with sprayer 01:11 How to use FOAMGUN PREWASH by ManiacLine with Foam Gun 01:39 Final result 01:48 Features and Recommendations FEATURES - It cleans, polishes and protects all external surfaces - Powerful and safe foaming prewash with dry and compact foam - It eliminates smog, road dirt, midges, organic residues of plants or birds - Excellent economy thanks to the high dilution ratios - It can be used frequently because it respects the protective agents previously applied, including protective nanotechnology-based or coatings - Multifunctional product: designed to be used both with pump sprayer and foam lance - Its use with the use of a pressure washer makes the subsequent washing phase safer by eliminating 90% of the dirt, allowing you to wash the car without the risk of creating swirls or micro-scratches - It is recommended to use with a Foam Gun with 1/10 dilution (1 part of product and 10 of water), or with a pump sprayer with 1/50 dilution - Pleasantly scented HOW TO USE You can dispense FOAM GUN PREWASH by ManiacLine in different ways, according to the type of dirt present on the car. With manual sprayer for a localized action on specific dirt The lower parts of the car are always the dirtiest. By dispensing FOAM GUN PREWASH by ManiacLine in low pressure diluted 1/10 (1 part of product and 10 of water) directly on the dirt, you will have an ideal performing and localized action on difficult dirt such as midges and mud. Wait a few minutes for FOAM GUN PREWASH by ManiacLine to act to remove the dirt from the surface. Finally, proceed with an accurate high-pressure rinse, helping yourself with the water jet to remove the coarsest residues of dirt. In this way, thanks to the kinetic energy of the pressure washer, you will remove the dirt that the emollient action of the pre-wash has detached from the surface. In the summer, or if you must work under the sun and at high temperatures, we suggest you wash and rinse one panel at a time. So, what is the correct procedure for a correct pre-wash? For the lower parts and localized dirt, directly spray FOAM GUN PREWASH by ManiacLine diluted 1/10 from bottom to top and rinse. Then, dispense it in foam gun mode, always from bottom to top following these dilutions: for winter dirt 1/5 (1 part of product and 5 of water) for summer dirt 1/10 (1 part of product and 10 of water) Apply a thick layer of foam to the vehicle and wait for it to start falling (This may take up to 5 minutes). Finally, proceed with rinsing with a high pressure water jet starting from top to bottom. RECOMMENDATIONS Make sure the vehicle surface is not hot and the car is in the shade avoiding direct sun. Before using FOAM GUN PREWASH by ManiacLine, in summer, rinse the vehicle to cool the surface or to remove the first part of dirt. Web: - Facebook: - Instagram: